Specify Copy Start On Wide Size Paper For The Bypass Tray - Minolta Di551 User Manual

4
5
Under "Size" select the size of the paper you have loaded.
? Did you select "STD size (special)"?
➜ Use the arrow keys to select the desired size.
? Did you select "Non STD size"?
➜ First select length or width. Then specify the desired dimension
using the touch screen keypad or the arrow keys.
? Did you select "Wide size paper"?
➜
Set the copy start. For more information, see page 4-22.
➜
Use the arrow keys to select the desired size from the list.
or
➜
Press the [INPUT SIZE] key. The display on the touch screen
changes. First select length or width. Then specify the desired
dimension using the touch screen keypad or the arrow keys.
6
Press the [OK] key to confirm your input.
The basic options are displayed again.
7
Configure the system settings for your job.
8
Press the [START] key on the control panel to start the copy job.

Specify Copy Start on Wide Size Paper for the Bypass Tray

For further information, see chapter 4 in the extended manual on the
CD-R.
4-22
Basic Functions
Di551/Di650