Basic Functions; Setting The Output Mode - Minolta Di551 User Manual

Basic Functions

4 Basic Functions
4.1

Setting the Output Mode

Define how your copies are to be output.
Depending on how your system is equipped, you may have several
available options for output.
The system may have the following equipment:
G
with Finisher FN-113 (optional)
G
with Finisher FN-6 (optional)
G
with Hole punch unit PK-2 (optional)
G with Hole punch unit PK-5 (optional)
G with Punch/Z-fold Unit ZK-2 (optional)
G with cover inserter B (optional for the Finisher FN-6)
G
without a finisher.
CAUTION
External influences can cause damage to the system!
The main tray of the finisher lowers during the output cycle.
Objects located under the main tray can damage the main tray.
➜
Do not put any objects under the main tray of the finisher.
Di551/Di650
4
4-1