Table of Contents
Advertisement
2
Refilling Tray 3
Add paper to paper tray 3.
These trays allow various paper sizes and alignments.
CAUTION
Incorrect handling can cause damage to the copier!
Do not touch the upper area of the edge guides to adjust them to the paper
size.
➜
To adjust the side edge guides, proceed as described in step 7.
1
Pull the drawer out as far as it will
go.
2
Lift the paper feed roller out of the
way.
3
only when changing the paper
size
Remove any remaining paper from
the paper tray. Slide the edge
guides completely out.
Set the back paper guide to the desired size.
4
Fan the new paper.
Align the paper edges straight.
5
Load the new paper so that the side
that undulates upward is face up.
❍
Tray 3
up to 1,500 sheets (80 g/m²)
6
Make sure not to exceed the
maximum paper filling level.
The paper stack must not be higher
than the red mark of the level
indicator.
2-40
Getting to Know Your System
Di551/Di650
Advertisement
Table of Contents
