When Incorrect Copies Are Produced - Konica Minolta Di1610 User Manual

When a Message Appears
6.10

When Incorrect Copies Are Produced

Symptom
The image is too light.
The image is too dark.
The copy is blurry.
Di1610/Di1610p
Possible Cause
The density level for the Auto
setting is set to "LIGHT".
The density level is set to
"LIGHT".
Does the message "TONER
EMPTY" appear in the
Display?
The paper is damp.
The density level for the Auto
setting is set to "DARK".
The density level is set to
"DARK".
The Original Glass surface is
dirty.
The original is not held tightly
against the Original Glass.
The paper is damp.
Action
Adjust the setting for
DENSITY LEVEL (A) in the
Utility mode. (p. 5-17)
Otherwise, cancel the "Auto"
density setting, and then
manually select the desired
density setting. (p. 4-11)
Ö
Press the [ ] key, and then
select a darker copy density.
(p. 4-11)
Change the Toner Cartridge
with a new one. (p. 6-6)
Change the paper.
Adjust the setting for
DENSITY LEVEL (A) in the
Utility mode. (p. 5-17)
Otherwise, cancel the "Auto"
density setting, and then
manually select the desired
density setting. (p. 4-11)
Press the [ ] key, and then
Ö
select a lighter copy density.
(p. 4-11)
Wipe the Original Glass
clean with a soft, dry cloth.
Place the original in position
so that it is held tightly
against the Original Glass.
Change the paper.
6-25
6