Before Making Copies
Precautions for Loading Paper
G
Be sure to observe the paper specifications (paper type, paper size,
and capacity) for each tray, otherwise a paper misfeed could result.
G
When paper is loaded into the Bypass Tray, a message appears,
indicating that the paper size be specified. Specify the size and type of
paper that is loaded. Paper loaded into the Bypass Tray is given
priority during feeding.
The size of FLS is preset to 330 mm × 210 mm. To change the FLS
G
size, contact a service representative.
Unsuitable Paper
The following types of paper should not be used, otherwise decreased
print quality, paper misfeeds or damage to the machine may occur.
G
Overhead projector transparencies that have already been fed
through the machine
Even if the transparency is still blank, do not reuse it.
G
Paper that has been printed on by a heat-transfer printer or an inkjet
printer
G
Paper that is either extremely thick or extremely thin
G
Folded, curled, wrinkled, or torn paper
G
Paper that has been left unwrapped for a long period of time
G
Damp paper
G
Perforated paper or paper with punched holes
G
Extremely smooth or extremely rough paper, or paper with an uneven
surface
G
Paper that has been treated, such as carbon-backed, heat-sensitive or
pressure-sensitive paper
G
Paper that has been decorated with foil or embossing
G
Paper of a non-standard shape (not rectangular)
G
Paper that is bound with glue, staples or paper clips
G
Paper with labels attached
G
Paper with ribbons, hooks, buttons, etc. attached
G
Curled or wrinkled paper
G
Art paper, coated paper or inkjet printer paper
Di1610/Di1610p
3
3-15