7
7.6
Checking the Total Number of Copies/Prints Produced
The [Meter Count] key on the control panel allows you to check the total number
of copies or printed pages produced since the installation of the copier.
It provides the following information.
Total Counter:
G
Shows the total number of copies or printed pages produced since the
installation of the copier.
Size Counter:
G
Shows the number of copies or printed pages produced on paper of a preset
size. (The size will be set by your Tech. Rep.)
Using the [Meter Count] Key
1
Press the [Meter Count] Key.
2
Make sure that "tc" appears on the
Display.
The Total Counter value is then
displayed.
E.g.: The Display looks like the one
shown on the right when the value is
1,234.
7-28
Using the Utility Mode
Di152/Di183