Minolta Color PAGEPRO EX Manual page 211

Specifications of Printer
Paper exit system:
System speed:
Warm-up time:
Developing system:
PC drum:
PC charging system: Rotation brush charging system
Image transfer system: Belt image transfer system, and roller
PC drum cleaning
system:
Paper separating
System:
Fusing system:
Acoustic noise:
Power supply:
Power consumption:
PDL:
CPU:
Memory:
Interface:
Font:
9-3
Face down exit system (Plain Paper 250
print maximum)
77 mm/ seconds
Within 150 seconds (when power is sup-
plied at 23°C / 73.4° F)
Fine Micro Toning system
OPC (Organic Photoconductor)
image transfer system
Cleaning blade system
Curvature separating system and charge
neutralizing pin
Heat belt fusing system
39 dB (A) or less (idle state)/
55 dB (A) or less (during operation)
AC 220 - 240V 50/60Hz
During operation 800W or less/ during
idle state (average), 45W or less (when
the heater lamp is OFF)
Adobe PostScript 3
NEC Vr4300, 133MHz
• ROM 16MB
• DRAM 80MB. Expansion up to
112MB is possible with options.
• Parallel (IEEE 1284 Type C connector)
• Ethernet (For use only with an optional
network card.)
• TokenRing (For use only with an
optional network card.)
Adobe 136 PS3 Fonts