Manual Pan/Tilt Operation; Pan/Tilt Angle Restrict; Display - Chauvet Intimidator Spot LED 250 User Manual

Manual Pan/Tilt
Operation
Pan/Tilt Angle
Restrict

Display

Page 16 of 26
To select whether you want the Intimidator™ Spot LED 250 to operate with normal
panning or inverted panning, do the following:
1. Press <MODE/ESC> repeatedly until PAn shows on the display.
2. Press <UP> or <DOWN> to select normal pan operation (PAn) or inverse pan
operation (r PAn).
3. Press <ENTER>.
To select whether you want the Intimidator™ Spot LED 250 to operate with normal tilting
or inverted tilting, do the following:
1. Press <MODE/ESC> repeatedly until tiL shows on the display.
Press <UP> or <DOWN> to select normal pan operation (tiL) or inverse pan
2.
operation (r tiL).
Press <ENTER>.
3.
You are able to restrict the pan and tilt angles on the Intimidator™ Spot LED 250 to
achieve the effect you like.
To select which pan angle to use, do the following:
1. Press <MODE/ESC> repeatedly until PA54 shows on the display.
2. Press <UP> or <DOWN> to select either 540° (PA54), 360° (PA36) or 180° (PA18).
3. Press <ENTER>.
To select which tilt angle to use, do the following:
1. Press <MODE/ESC> repeatedly until Ti27 shows on the display.
2. Press <UP> or <DOWN> to select either 270° (Ti27), 180° (Ti18) or 90° (Ti 9).
3. Press <ENTER>.
You are able to flip the LED display for easy readability in any mounting situation.
To select your display angle:
1. Press <MODE/ESC> repeatedly until diS shows on the display.
Press <UP> or <DOWN> to select normal display mode (diS) or inverse display
2.
mode (r diS).
Press <ENTER>.
3.
Intimidator™ Spot LED 250 User Manual (Rev. 03)