Miscellaneous Operations; Reset Software; Password Channel - Chauvet Intimidator Spot LED 250 User Manual

Miscellaneous Operations

Reset Software

Password
Channel
Page 18 of 26
To reset the software on the Intimidator™ Spot LED 250, do the following:
1. Press <MODE/ESC> repeatedly until rESt shows on the display.
2. Press <ENTER>. The product will reset all settings in the software to the default
factory settings.
The Intimidator™ Spot LED 250 contains a password-protected mode which allows you
to calibrate and troubleshoot any small issues you may have during normal operation.
In order to access this mode, do the following:
1. Press and hold <MODE/ESC> for at least 10 seconds.
2. Use the <UP> and <DOWN> buttons to enter the password: 2323.
3. Press <ENTER>.
In this mode you have several options for adjustment.
Parameter
Pan Adjust
Tilt Adjust
Gobo Wheel Adjust
Color Wheel Adjust
Prism Adjust
Lamp Brightness Adjust
Pan Switch Strength
Tilt Switch Strength
Programming Steps Description
P128
Manually adjust the pan angle
t128 Manually adjust the tilt angle
G128
Manually adjust the gobo wheel
C128
Manually adjust the color wheel
L128
Manually adjust the prism
Manually
d000
brightness of the lamp
P--0
Adjust the strength of pan switch
t--0 Adjust the strength of tilt switch
Intimidator™ Spot LED 250 User Manual (Rev. 03)
adjust the starting