Table of Contents
Advertisement
Reduction margin
Your fax machine's reduction margin is measured in millimeters (mm). We'll define
reduction margin by explaining how it's used:
When a fax message enters your machine's electronic brain, the machine measures
the message's length and compares it to (a) the length of your selected paper plus
(b) the reduction margin you set. If the length of the incoming message is shorter
than (a) and (b) put together, your machine prints the message on just one sheet.
If it's longer, your machine prints the message on more than one sheet.
Note: An Auto reduction setting and a reduction margin setting of 40mm will
print most incoming faxes as single pages. Try this combination first and
then, only if you have problems with it, select different settings.
Half-page reception
Half-page reception can conserve paper if some of the faxes you receive are half-
page, "memo-sized" messages. When activated, this feature tells the machine to
combine two of these half-page receptions onto a single sheet. Half-page reception
only combines half-page messages sent back-to-back during the same transmission.
It won't combine two half-page faxes from separate transmissions.
Adjusting the print settings
1
Press /
,
, 0, 2,
PROGRAM
J
ENTER
reduction rate:
Prnt Reduc Rate:Auto
Program/Enter
2
Press
or /
until the reduction setting you want appears.
PROGRAM
In this example, we've chosen 91%.
Prnt Reduc Rate: 91%
Program/Enter
3
Press
to save the setting. The
ENTER
Prnt Reduc Rate: 91%
Margin(00-85mm):
4
Use the numeric keypad to enter the reduction margin you want. If
necessary, press
or /
PROGRAM
we've chosen 38mm.
Prnt Reduc Rate: 91%
Margin(00-85mm):
. The
shows the current print
LCD
shows the current reduction margin:
LCD
40
to move the cursor. In this example,
38
5
Press
to save the setting. The
ENTER
half-page reception:
Half Page Recpt: Off
Program/Enter
6
Press
or /
until the setting you want appears. In this example,
PROGRAM
we've chosen On.
Half Page Recpt: On
Program/Enter
7
Press
to save the setting.
ENTER
Copy settings
You can set two parameters for copying:
• Copy reduction rate — Works the same way as the print reduction rate (see page
2.2 for more details).
• Reduction margin — Serves the same purpose as the reduction margin for
printing (see "Reduction margin," left column).
You set both parameters in the same operation:
Note: The manufacturer suggests a reduction margin of 00 for your copy settings.
1
Press /
,
, 0, 3,
PROGRAM
J
ENTER
Copy Reduc Rate:100%
Program/Enter
Beyond the basics
shows the current setting for
LCD
. The
shows the current copy reduction rate:
LCD
2.3
Advertisement
Table of Contents
