13, Attaching The Appliance To The Top Of The Cavity; 14, Attaching The Individual Appliance; To The Side Of The Cavity - Thermador T24IF70NSP/47 Installation Instructions Manual

13. Attaching the appliance to the top
of the cavity
• Attach the cover strip to the attachment plate (top).
Shorten the fitting stdp to the required height!
Screw the attachment plate lugs (top) to the overhead
fumitu re/fixtu res.
14.
In the case of a side-by-side installation connect
both cover rails to the bolt included in the installation
accessories for side-by-side installation
Attaching the individual appliance
to the side of the cavity
Fix the attachment plate side lugs (top) depending on
the installation situation.
If there is no gap or only a slight gap, it is not neces-
sary to fix the side lugs.
If there is a fairly large gap above the appliance,
fit a wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.
Screw the attachment plate lugs (side) to the adjacent
furniture/fixtures (individual appliances only).
In the case of a side-by-side installation this installa-
tion step is not possible. These parts have been
removed.
27