Side-By-Side Installation - Thermador T24IF70NSP/47 Installation Instructions Manual

Side-by-Side installation
The cavity dimensions indicated above for the respective
appliance apply to a Side-by-Side installation of two
appliances.
The total width of the cavity results from the addition of the
cavity widths indicated for the two appliances.
Example:
Freezer 18"/Refrigerator 30"
(130)
31_1_ '
(100)
48"
18"
, (1219)
30"
9" ' 15" (762)
e
_i iI_
34"
33,6)
400
837/8"
(2130)
18" 30"
(457) 48" (762)
(1219)
÷
@ @-
18" _!_ 30"
(457) 48"
(762)
(1219)
ii
it is strongly recommended the top panel boundary of the niche
5
be 0f s0tid materia! (!8 thickness). Make sUi÷ that the upper
boundary is completely flush for a depth of at least 4,1 ............
Make sure that the side wails of the niche are completely flus!!
if; for Some reasons; a seperate niche cabinet is createct,
make sure that the furniture return area is at least 4!'deep.
Legend:
A Area for installation of the water connection.
It is recommended the water-box be placed adjacent to
the installation cavity, so that it can be accessed for
service without uninstalling the appliance. If this is not
possible, place the recessed water box adjacent to the
power supply socket elevated at the heights as
referenced in areas A+B.
B Area for installation of the power connection.
C Opening depth of niche, depending on kitchen design.
C = 24" (610 ram) minimum
NOTE:
Cavity must be square. Side wall of the cavity must be flush.
10