Attachingthe Appliance To The Top Of The Cavity - Thermador T36IT70NNP/04 Installation Instructions Manual

t
Min 4x
1Y4"
[3 Unscrew the height adjustable feet until the mark
on the base has reached the indicated guide
dimension (11/4"/ 32 mm).
[_lt is very important to comply with this dimension for
the subsequent alignment of the furniture fronts.
C3 Align the furniture fronts with the spirit level.
_i] Note:
Do not twist or jam the appliance inside the cavity!
When unscrewing the height adjustable feet,
proceed gradually: Always alternate between left
and right, left and right, etc..
The adjustment of the rear feet is facilitated if the
appliance is unloaded at the rear.
If using a wooden beam as an alternative anti tip
device according to point 5 of this installation
manual, rotate the appliance all the way towards
the wooden beam.
11.
C3
Attaching the appliance to the
top of the cavity
Screw the attachment plate tugs (top) to the
overhead furniture/fixtures.
[3 Fix the attachment plate side tugs (top) depending
on the installation situation. If there is no gap or only
a slight gap, it is not necessary to fix the side tugs.
C3 If there is a fairly large gap above the appliance, fit a
wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.
18