Installation Dimensions; Single Installation - Thermador T24IF70NSP/47 Installation Instructions Manual

Installation dimensions
Single installation
max. 13/32"
(lo)
837/8"
(21:
X
31/3
(25)
51/_ ' 1--
(130) L
315/1_' t
(lOO)
X
i I!iii!iiiiii Hii i iiii iiiiiiii iiiiii iiiiii
it is strongly recommended thle top panel boundary of the
5
niChebe OfSolid material (/8 thickeess). Make suie that
the upper boundary is complete!y flush for a depth Ofat
least 4":
Make sure that the side wails of the niche are completely
flush ! tf, for some reasons; a seperate niche cabinet is
created, make sure that the furniture return area is at least
4!' deep.
x 3
133/4 ''
(350) 1_ "
max. o/32
(1o)
Appliance X Y
18"
(173/4"/A50,8
mm) 18" (457 mm) 9" (229 mm)
24" (233/4"/603.2 mm) 24" (610 mm) 12" (305 mm)
30" (293/4"/755.6 mm) 30" (762 mm) 15" (381 mm)
Legend:
A Area for installation of the water connection.
It is recommended the water-box be placed adjacent to
the installation cavity, so that it can be accessed for
service without uninsta[[ing the appliance. If this is not
possible, place the recessed water box adjacent to the
power supply socket ebevated at the heights as
referenced in areas A+B.
B Area for installation of the power connection.
C Opening depth of niche, depending on kitchen design.
C = 24" (610 mm) minimum
NOTE:
Cavity must be square. Side wall of the cavity must be flush.
9