21, Attaching The Adjusting Rail To The Furniture Door - Thermador T24IF70NSP/47 Installation Instructions Manual

21. Attaching the adjusting rail to the
furniture door
• Loosen the 2 nuts and remove the adjusting rail.
The adjustincj rail is the most important means of
adjusting the furniture front.
Unscrew the installation support part from the appliance
door.
Store the positioning aids, there will be used in an
installation step hater.
4xl 5
• Mark this amount X on the rear of the furniture door.
• Determine and mark the oentedine of the furniture door.
• Put on the adjusting rail and align abongthe marks.
Mark the drill holes.
• Ddll the holes.
• Screw on the adjusting rail tightly.
Notes:
- Attach the adjusting rail to the furniture door with at least
6 screws. One screw should be inserted under each
double threaded bolt.
18"
"k
24"
30"
lOx
m
Wine unit)
The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best Ioad-bearincj material of the furniture door.
• Measure the distance X between the adjustincj rail and
the overhead furniture/fixtures.
32