Attaching The Appliance In The Cavity - Thermador T36BT71FS Installation Instructions Manual

12. Attaching the appliance in the cavity
Unscrew the height-adjustable feet until the mark on
the base has reached the indicated guide dimension
(11/4" / 32 mm).
@
@
It is very important to comply with this dimension for
the subsequent alignment of the furniture fronts.
Align the furniture fronts with the spirit level.
Before attaching the appliance in the cavity, check
- that the top and sides of the frame are situated on
the cavity front,
- that the finger guard functions by opening and
closing the two refrigerator compartment doors
several times.
Open one door of the refrigerator compartment.
Pull finger guard all the way out of the gap between the
appliance and cavity wall.
@
@
@
@
Screw the frame to the cavity wall through the gap
between the door and carcass (3 screws).
Under the freezer compartment drawer screw the frame
to the cavity wall (1 screw).
Open the other door of the refrigerator compartment
and pull out the finger guard. Screw frame to the cavity
wall (4 screws).
Push the finger guard through the frame recess into the
gap between the appliance and cavity wall
18