Table of Contents
Advertisement
6.8
DSL
To access the DSL settings, first click On Advanced Setup and then click on DSL.
The DSL Settings dialog box allows you to select an appropriate modulation mode.
Option
Auto Mode
(G.dmt, G.lite or T1.413)
G.dmt/G.lite
T1.413
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
AnnexM
Inner Pair
Outer Pair
Bitswap Enable
SRA Enable
Description
Sets the system auto-sense between G.Dmt, G.lite, or
T1.413
Sets G.Dmt/G.lite if you want the system to use either
G.Dmt or G.lite mode.
Sets the T1.413 if you want the system to use only
T1.413 mode.
The device can support the functions of the ADSL2.
The device can support/enhance the long loop test.
The device can support the functions of the ADSL2+.
Covers a higher "upstream" data rate version, by
making use of some of the downstream channels.
Reserved only
Reserved only
Allows bitswaping function
Allows seamless rate adaptation
76
Advertisement
Table of Contents
