Downloading The Latest Version Of The Firmware; Installing The Latest Version Of The Firmware On The Server; Enabling The Trusted Platform Module; Introduction - HP Integrity rx6600 User's & Service Manual

To ensure you have the latest version of the firmware running on the server, download the latest
version of the firmware from the web, and create a CD to install the firmware on the server.

Downloading the Latest Version of the Firmware

To download the latest version of the firmware from the web, follow these steps:
1. Go to http://www.hp.com/go/bizsupport.
2. Select download drivers and software.
3. Select Itanium-based servers from the Server category.
4. Select your server from the servers listed.
5. Select your operating system.
6. Select the firmware category you want to download.
7. Download the firmware to a CD.

Installing the Latest Version of the Firmware on the Server

To install the latest version of the firmware on the server, follow these steps:
1. Start a server console session. See
2. Insert the CD with the copy of the latest version of the firmware.
3. Using the EFI Boot Manager menu, boot to the drive that contains the CD with the updated
firmware.
4. Follow the instructions to update the firmware.

Enabling the Trusted Platform Module

This section provides instructions on how to enable the trusted platform module (TPM).

Introduction

The TPM is an optional security component which enhances security capabilities for the server if
it is running the HP-UX operating system. The TPM is a security chip that is unique to the server. It
performs key security processes independent of other hardware components. The TPM creates and
stores additional encryption keys from the root key of the system. The encryption keys created by
the TPM encapsulate system application encryption keys to provide an additional layer of security
for sensitive system data.
The fundamental capabilities of the TPM include:
Platform authentication
Sensitive information protection
Data integrity
System privacy
IMPORTANT:
TPM security component.
WARNING!
from the server prior to performing this procedure.
Voltages are present at various locations within the server whenever an AC power source is
connected. This voltage is present even when the main power switch is in the off position.
Failure to observe this warning can result in personal injury or damage to equipment.
CAUTION:
ESD safety precautions can result in damage to the server.
1 16 Installing the System
You must run the supported version of the HP-UX operating system to utilize the
Ensure that the system is powered off and all power sources have been disconnected
Observe all ESD safety precautions before attempting this procedure. Failure to follow
Section : "Console Setup" (page 77).