Replacing The I/O Board Assembly - HP Integrity rx6600 User's & Service Manual

Figure 77 I/O Board Assembly Removal and Replacement

Replacing the I/O Board Assembly

IMPORTANT:
to engage the assembly correctly with the midplane board socket.
NOTE: The I/O board assembly is large. Use care when sliding it into the server chassis.
To replace the I/O board assembly, follow these steps:
1. Transfer the following components from the removed I/O board assembly to the replacement
I/O board assembly in the following order:
a. SAS core I/O card. See
b. LAN core I/O card. See
c. Trusted Platform Module (TPM). Use
if there is a TPM on the removed I/O board assembly. If so, transfer the TPM from the
removed I/O board assembly to the replacement I/O board assembly. See
and Replacing the Trusted Platform Module" (page
d. Core I/O board. See
2. Align the I/O board assembly rails with the chassis slots, and slide the assembly into the
chassis until it stops against the midplane board socket
Ensure that the I/O board extraction handles are in the outward, unlocked position
"Removing and Replacing the SAS Core I/O Card" (page
"Removing and Replacing the LAN Core I/O Card" (page
"Removing and Replacing the Core I/O Board" (page
Figure 80: "TPM Location on I/O
230).
(Figure
Removing and Replacing the I/O Board Assembly 225
Board", to determine
"Removing
233).
77).
236).
237).