Table 62 PCI/PCI-X/PCIe Slot-Rope-ACPI Paths (continued)
Physical Slot #
9
Public, shared at 66 MHz.
10
Public, shared at 66 MHz
1
IMPORTANT:
servers, repair and replace should continue to be performed with the version 1 I/O backplane. For servers shipped as
of July 1, 2008, repair and replace should be performed with version 1.1 I/O backplane. The device paths for version
1.1 are as follows.
Function Associated
Slot
with Path
3
I/O PCIe x8
(switched with slot 4)
Optional SAS core
I/O card
4
I/O PCIe x8
(switched with slot 3)
Optional SAS core
I/O card
Management Subsystem (iLO 2 MP/BMC)
Manageability LAN LED on the Core I/O board CRU bulkhead
The manageability LAN uses two LEDs, viewable from the rear of the server. The manageability
LAN LED indicates link and activity status.
Only 10 Mb and 100 Mb speeds are currently supported on the manageability LAN.
Table 63
Table 63 Manageability LAN LED States and Speeds
LED
Status
Speed
lists the manageability LAN LED statuses with their corresponding LED states.
NOTE:
For information on the Core LAN LED, see
(SAS/SATA/SCSI/DVD/HDD/Core I/O)" (page
Manageability Reset Button on Core I/O Board FRU's Bulkhead
The manageability Reset button, with pinhole access from the rear of the server, allows you to reset
the iLO 2 MP; it optionally also resets user-specified values to factory default values. A momentary
Physical Rope
#
OLARD
1
Yes
1
Yes
The new version of the PCI/PCI-X/PCIe backplane (version 1.1) shipped on July 1, 2008. For existing
Location as Viewed from
Rear of Chassis
3rd from left
4rd from left
States
Blinking green
Solid green
Off
Solid amber
Off
Logical ACPI Path
Acpi(HWP0002,PNP0A03,100)/Pci(1|*)
Acpi(HWP0002,PNP0A03,100)/Pci(2|*)
HP-UX Device Path
0/6/0/0/0/0/1/0/0
Acpi(HPQ0002,PNP0A08,600)/Pci(0|
0)/Pci(0|0)/Pci(1|0)/Pci(0|*)
0/6/0/0/0/0/0/0/0
Acpi(HPQ0002,PNP0A08,600)/Pci(0|
0)/Pci(0|0)/Pci(0|0)/Pci(0|*)
Link
Activity
Link with no activity
No link
100 MB
10 MB
"I/O Subsystem
168).
Management Subsystem (iLO 2 MP/BMC)
EFI Device Path
167