Your Receiver; Your Receiver 2.1 Default Pin Code: 1234; Default Pin Code: 1234; Front Panel - Strong SRT 8903 User Manual

PART 2 • English

2.0 YouR RECEIvER

2.1 default PIn code: 1234

2.2 front panel

1. smartcard reader
2. Power button:
pq:
3.
*The Conax smartcard and subscription are not part of this set-top box.

2.3 Rear Panel

1. AnT In
2. To Tv
3. sPdIf coaxial
4. hdmI
5. Tv sCART
6. vIdEo (RCA)
7. AudIo (l/R)
8. usb device
9. Power cable

2.4 CA Interface

Although some TV and radio services are free-to-air, others are only available on a subscription basis
and can only be received via a Conditional Access component.
Inserting a CA card
It is suitable for Conax coding system.
1. Open the right-hand flap on the front panel of the product to access the card slot.
2. Insert the CA card into the slot. Insert the smartcard with the chip side down.
Built in Conax smartcard reader for encrypted
channels with Conax smartcard and valid
subscription.* Insert smartcard with the chip side
down.
Turn ON from standby, and turn OFF to standby
mode
Viewing mode: switch channel up/down.
Menu mode: for navigation
To connect an antenna for reception of broadcasting
signal
To connect a TV set
To connect to digital audio amplifier
To connect receiver to your TV set using an HDMI
cable
To connect receiver to your TV set using a SCART
cable
To connect to the RCA video input of your TV or VCR
using an RCA cable
To connect to the audio input of your HIFI or
television
To connect an external storage device
To connect the receiver to your main power supply
Fig. 1
Fig. 2
Fig. 3
5