Starting And Shutting Down Your Dvr - HIKVISION DS-7304HFI-SE User Manual

User Manual of DS-7304HFI-SE DVR

2.1 Starting and Shutting Down Your DVR

Proper startup and shutdown procedures are crucial to expanding the life of your DVR.
To startup your DVR:
1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power
Supply (UPS) be used in conjunction with the unit.
Connect the DVR to a VGA monitor. You will only see the DVR menu system when it's connected to a VGA monitor.
2.
3. Press the POWER switch on the back rear panel. The Power indicator LED should turn green. The unit will begin to
start.
4. After startup, the Power indicator LED will remain green. (Figure 6).
To shut down the DVR:
Enter the Shutdown menu, shown in Figure 7 by going to Main Menu > Maintenance > Shutdown.
1.
Select the Shutdown button.
2.
Click the Yes button.
3.
Figure 6. Startup Splash Screen
Figure 7. Shutdown Menu
16