Using The Ir Remote Control - HIKVISION DS-7304HFI-SE User Manual

User Manual of DS-7304HFI-SE DVR
3. Compound Buttons:
•
1 MENU: (1) Enter numeral "1"; (2) Enter the main menu interface
•
2ABC/F1: (1) Enter numeral "2"; (2) Enter letters "ABC"; (3) The F1 button when used in a list field will select
all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
3DEF/F2: (1) Enter numeral "3"; (2) Enter letters "DEF"; (3) The F2 button is used to cycle through tab pages. It
will also bring up the Channel & OSD Position settings.
•
4GHI/ESC: (1) Enter numeral "4"; (2) Enter letters "GHI"
•
(3) Exit and back to the previous menu
•
5JKL/EDIT: (1) Enter numeral "5"; (2) Enter letters "JKL"; (3) Delete characters before cursor;
•
(4)Select the checkbox and ON/OFF switch; (5) Start/stop record clipping in playback
•
6MNO/PLAY: (1) Enter numeral "6"; (2) Enter letters "MNO";
•
(3) Playback, for direct access to playback interface
•
7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Quick record, for direct access to quick record
interface; manually enable/disable record
•
8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control interface
•
9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera display in preview
•
0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase alphabet, symbols and
numeric input)
4 SHIFT: Switch of compound keys between the numeric/letter input and functional control.
5. DIRECTION/ENTER Buttons:
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to fast-forward and rewind recorded video. The Left
and Right button will select the next and previous day of recordings. In Preview mode, these buttons can be used
to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can also be used to
tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play mode, pressing
the ENTER button will advance the video by a single frame.
6. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text field before
you're able to edit its content. After you're done entering text, you must hit the ENTER button to be able to move on to the next
field.

1.3.2 Using the IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 4.
Batteries (2x AAA) must be installed before operating.
11