HIKVISION DS-7304HFI-SE User Manual page 23

User Manual of DS-7304HFI-SE DVR
Control the PTZ using PTZ control buttons. Pan and tilt PTZ by clicking on the directional buttons. Zoom in and
1.
out using the Zoom In/Out buttons and recall presets, patrols and patterns by clicking the number next to the
corresponding icons.
Click the Close icon to return to Live Feed mode.
2.
Note:
PTZ parameters for the camera must be set correctly before the PTZ can be controlled.
Note:
A maximum of five presets, four patrols and patterns can be displayed on this interface.
More presets, patrols and patterns can be recalled in the PTZ Configuration menu.
•
Audio: Enable/disable audio for selected display. To enable or disable audio:
Select display to enable/disable audio.
1.
Enable audio by clicking the Enable Audio icon and disable audio by clicking the Disable Audio icon. An error
2.
message similar to the one shown in Figure 15 will pop up if the Enable Audio option is not selected in the
Display Configuration menu for the specified channel.
•
Digital Zoom Mode: Enable digital zoom on the selected channel. Once enabled, the regular feed will be shown in the
lower right corner while the zoomed in view will be shown on the full screen. The zoomed in region may be changed by
moving the red rectangle in the regular feed window.
•
Full Screen Mode: Enable full screen mode for selected display. To enable full screen mode:
Select display to enable full screen on.
1.
Click the Full Screen icon.
2.
Click the Exit Full Screen icon to return to normal display mode.
3.
Figure 14. PTZ Control Mode
Figure 15. Enable Audio Error Window
23