Table of Contents
Advertisement
User Manual of DS-7304HFI-SE DVR
To setup an advanced recording schedule:
1.
Enter the Advanced Schedule Configuration menu, shown in Figure 22 by going to Main Menu > Recording
Configuration > Advanced Schedule Configuration.
2.
Select the camera to configure from the camera drop down menu. If all the cameras are to be configured with the same
settings, select All Cameras from the list.
3.
Check the Enable checkbox to enable the recording schedule. If the checkbox is unchecked, the recording schedule
will be disabled.
4.
Select a day between Monday to Sunday to configure schedule for.
5.
Setup time periods for schedule. If the 24HR checkbox is checked, recording will occur over the entire day. To setup
multiple time periods, uncheck 24HR and enter the Start and Stop Time for the selected day. The start and stop time
are listed using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm).
6.
Select recording type under Type for selected day of the week. Recording type includes Continuous for continuous
recording or On Event for recording when an event is triggered (i.e. from detected motion) for the selected time period.
7.
If there are scheduling errors detected, such as overlapping time periods, error messages such as those shown in Figure
23 will appear.
Select the Add button to add time frame to schedule. The newly added time frame will appear in the schedule on
8.
the left, with the schedule parameters shown on the right. Continuous recordings are shown in blue on the
schedule while event recordings are shown in yellow. An example of this can be seen in Figure 24.
Figure 22. Advanced Schedule Configuration Menu
Figure 23. Advanced Schedule Configuration Error Messages
31
Hide quick links:
Advertisement
Table of Contents
