Rebooting And Locking Your Dvr; Setting Date & Time - HIKVISION DS-7304HFI-SE User Manual

User Manual of DS-7304HFI-SE DVR

2.2 Rebooting and Locking Your DVR

While in the Shutdown menu (Figure 7), you may also reboot or lock your DVR. Locking your DVR will return you to the
Live Feed mode, which will require the correct administrator password to exit out of it. The Reboot button will reboot
your DVR.
To reboot or lock your DVR:
1. Enter the Shutdown menu by going to Main Menu > Maintenance > Shutdown.
2. Select the Lock button to lock the DVR or the Reboot button to reboot the DVR.
2.3 Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
To setup date and time:
Enter the System Configuration menu by going to Main Menu > System Configuration, as shown in Figure 8.
1.
Click the Time/Date button to enter the Time/Date menu (Figure 9).
2.
The current system time and date as well as the time zone will be displayed. Using the directional buttons on the
3.
front panel/remote or the mouse, select the correct date, time and time zone.
To enable Daylight Savings Time, click and check the Enable DST checkbox.
4.
Figure 8. System Configuration Menu
Figure 9. Time/Date Menu
17