Pedestal (Free-Standing) Parts - IBM 4820 Planning, Installation And Service Manual

Free-standing pedestal instructions
Free-standing pedestal
Follow these instructions for installing the 4820 SurePoint Solution to the
free-standing pedestal:
Attaching the free-standing pedestal to the counter
Note: Attaching the free-standing pedestal to the counter is optional. Your pedestal
Follow these steps to mount the 4820 SurePoint Solution to your counter.
1. Using the free-standing pedestal mounting template (Figure 62 on page 90) as a
2. Place the pedestal so that the mounting bolts align with the counter screw
3. Use the enclosed M6 screws to secure the pedestal to the counter. The slots
4. See "Tailoring your installation" on page 11 and continue with your installation.
Mounting the 4820 to the free-standing pedestal
Review the parts diagram in Figure 25, and then follow the steps to attach the 4820
SurePoint Solution to the free-standing pedestal:
Figure 25. Pedestal (free-standing) parts
1. If attaching the free-standing pedestal to the counter, ensure that the pedestal is
26
4820 Planning, Installation and Service Guide
may not require mounting.
guide, mark the screw hole locations for drilling through the counter. Use 8-mm
bit (5/16-in.) bit to drill the four screw holes.
holes.
located in the metal support bracket allow you to position the pedestal for
maximum stability.
secure.
Update November 2005
Mounting bracket cover
Cable cover
Screws
Mounting bracket
Free-standing base