Power Usage; Spill Resistance; Calling For Service; Power Usage For 4820 Surepoint Solution - IBM 4820 Planning, Installation And Service Manual

Update November 2005

Power usage

|
|
|
|
| |
| | |
|
| | |
| | |
| | |
| | |
|
|
|
|
|
|
|
|
|
|
|
|
|

Spill resistance

Calling for service

Table 5 lists the power consumption for the 4820 SurePoint Solution.
The 4820 SurePoint Solution consumes less power and dissipates less heat than a
similar-size CRT.
Table 5. Power usage for 4820 SurePoint Solution
Models
4820-10D, 4820-1FR
4820-2GB, 4820-2WB
4820-5GN, 4820-5WN
All others
All 4820 SurePoint models can be powered from a power adapter, which accepts
100V to 240V ac input. However, some models offering USB or EIA-232
communications interfaces can be powered from the POS terminal and do not
require a power adapter.
v Models with the USB interface can be powered from the POS terminal with the
following exceptions:
– 15-inch models require a power supply when attached to 4694 POS terminals.
– 12-inch dual bulb models require a power supply when attached to 4694 POS
terminals if more than 2.5 watts of power is to be used for devices attached to
the auxiliary USB ports.
v Models with the EIA-232 interface can be connected to powered EIA-232 ports
on SurePOS 700 or 300 terminals. (Hot plugging is not supported.)
The 4820 SurePoint Solution is designed to meet the following standards:
v National Electrical Manufacturers Association (NEMA) Type 5 rating per NEMA
Standards Publication number 250-1991 Enclosures for Electrical Equipment
v IP 52 rating per IEC 529
When you call IBM for warranty information or service, be sure to have the following
information available:
v Machine type/model
v Serial number
Locate this information either on the lower-right edge at the rear, or on the side of
the machine.
Size
10-inch
12-inch dual bulb
15-inch
12-inch single bulb
Chapter 1. Introducing the IBM 4820 SurePoint Solution
Power consumption (on
and operating)
12 W
20 W
23 W
16 W
9