Integrated Pedestal Parts - IBM 4820 Planning, Installation And Service Manual

Update November 2005
Mounting the 4820 SurePoint Solution to the integrated pedestal
Figure 28 shows the parts of the integrated pedestal.
Thumb screws
Figure 28. Integrated pedestal parts
Follow these steps to attach the 4820 to the integrated pedestal:
1. Ensure that you have routed the cables.
2. Secure the pedestal to the system unit:
3. Mount the 4820 onto the pedestal.
Note: Ensure that you have attached the cables to the appropriate ports in the
a. Align the holes of the integrated base plate with the holes in the unit.
b. Tighten the thumb screws securely.
Note: See "Integrated touch pedestal" on page 36.
a. Place the display on the pedestal mounting bracket. Make sure that the
metal tabs on the pedestal slide into the appropriate slots on the back of the
4820 display.
b. Secure the 4820 to the pedestal by using four screws.
c. Attach the power and video cables to the 4820 display.
back of the system unit.
Integrated pedestal instructions
Mounting bracket cover/
audio kit
Mounting bracket cover Mounting bracket cover
Cable cover Cable cover
Mounting bracket Mounting bracket
Trough cover Trough cover
Trough
Integrated base plate
Chapter 2. Installing the IBM 4820
29