Installation; Electrical Requirement; Location; Grounding Instructions - Endurance T10 User Manual

INSTALLATION

ELECTRICAL REQUIREMENT

Your ENDURANCE treadmill is intended for use in the country to which it was
shipped. Electrical supplies outside of this country may differ and may not be
compatible with the product. Please consult Customer Support before using the
treadmill in a different country.

Location

When choosing a location for the treadmill, pick a location that is unobstructed.
The treadmill must have the following clearance.
Non-entry side of treadmill - Minimum of 8 inches (20cm)
Entry side of treadmill - Minimum of 36" (90cm)
Front of the treadmill - Minimum of 12 inches (30cm)
Behind treadmill - Minimum of 6 feet (180cm)
These spacing requirements are mandatory for the safe use of the treadmill. If an
accident should occur, you must have sufficient space to move away from the
treadmill.

Grounding Instructions

The treadmill must be properly grounded prior to use. Proper grounding reduces
the risk of shock or damage to the treadmill. The powercord's plug is equipped
with a grounding conductor that must be used with an electrical outlet installed in
accordance to all local codes and ordinances.
DO NOT use a temporary adapter that bypasses this function. This will stop
the safety equipment from functioning properly and may void your warranty.
8