Leveler Legs - Endurance T10 User Manual

DANGER!
A risk of electrical shock may result from improper connection of the equipment-
grounding conductor. Check with a qualified electrician if you are in doubt as to
proper grounding technique.
DO NOT MODIFY the plug provided with this product. If it will not fit an electrical
outlet, have a proper outlet installed by a qualified electrician.

Leveler Legs

After finding a location that is suitable for
the treadmill, the rear legs must be adjusted
to provide stable support. Located on the
side of each leg is a thumb-wheel that will
allow you to lower or raise the leg until it is
properly seated on the floor.
WARNING: DO NOT adjust legs while the treadmill is on. Turn the power switch
to the OFF position.
While kneeling behind the treadmill, place the heal of your hands on each side of
the treadmill directly above the running-belt adjustment bolts. Attempt to rock the
treadmill by alternately pressing downward on each side. If you feel even a slight
movement on one side adjust that side until the movement has stopped.
For example, if you feel a slight rocking on the right side, start by turning the
thumb-wheel on the right leg counter-clockwise to lower the leg until the
movement stops.
9