11
IR Port
12
Power Contacts
13
CLR Key
14
Fn Key
15
PC Card Slot
16
USB Port
17
Headset Jack
18
Battery Pack
Cover Lock
Switches
19
R Trigger Key
20
L Trigger Key
21
Wrist Strap Hole
22
C-MOS Imager
(C-MOS Imager
models only)
Reader Port
(Laser Scanner
models only)
23
Reset Switch
24
CF Card Slot Unit
Terminal
25
Battery Pack
Cover
E-20
This port is used for IR communication with another Handheld
Terminal or the Bridge Satellite Cradle.
Contact point for supplying power from the Bridge Satellite
Cradle and Cradle-type Battery Charger.
Press to clear all key inputs.
Press this key and then a function key or number key to
configure settings or to run previously registered applications.
For insertion of a separately available PC card.
For connection to a computer or other device using a USB cable.
For connection of a commercially available headset (∅2.5mm).
Slide these switches to lock and release the battery pack cover.
Press to perform a code read operation. This is also pressed to
perform a full reset.
Press to perform a code read operation.This is also pressed to
cancel a full reset.
Connect the wrist strap here.
Reads bar codes and 2-dimensional codes.
Reads bar codes.
Press to reset the Handheld Terminal.
For connection of a separately available CF Card Extension
Unit.
Covers the compartment that holds the battery pack.