Altera Cyclone III FPGA User Manual page 7

Altera Corporation
July 2010
2. Follow the on-screen instructions to complete the installation
process.
The installation program creates the Cyclone III FPGA Starter Kit
directory structure shown in
Figure 1–1. Cyclone III FPGA Starter Kit Default Installed Directory Structure
<install dir>
The default Windows installation directory is C:\altera\ <version> \.
kits
Table 1–1 lists the file directory names and a description of their contents.
Table 1–1. Installed Directory Contents
Directory Name
board_design_files Contains schematic, layout, assembly, and bill of material
board design files. Use these files as a starting point for a
new prototype board design.
demos Contains demonstration projects that may or may not
contain up-to-date source code.
documents Contains the development kit documentation.
examples Contains the example design files for the Cyclone III FPGA
Starter Kit
factory_recovery Contains programming files for returning board to factory
default condition.
Figure 1–1.
cycloneIII_3c25_start
board_design_files
demos
documents
examples
factory_recovery
Description of Contents
Cyclone III FPGA Starter Kit User Guide
Getting Started
1–3