Leds And Buttons; Illuminating Leds - Altera Cyclone III FPGA User Manual

LEDs and Buttons

LEDs and
Buttons
3–2
Cyclone III FPGA Starter Kit User Guide
You can locate the source for the example design in the <kit
path>\examples\cycloneIII_3c25_starter_board_standard directory.
1
To launch the control panel user interface, run the
control_panel.exe program found in the <kit
path>\demos\control_panel directory
Figure 3–1. Control Panel Window

Illuminating LEDs

To illuminate an LED, follow these steps:
1. The LED & Buttons tab should be visible when the application runs.
If it is not visible, click the LED & Buttons tab
2. Click on LEDs to individually turn on the LEDs.
(Figure 3–1).
(Figure 3–2).
Altera Corporation
July 2010