Altera Cyclone III FPGA User Manual page 30

Creating a Flash-Programmable POF File
Figure A–4. Updated Convert Programming Files Window
A–4
Cyclone III FPGA Starter Kit User Guide
9. Click Generate. If you are overwriting the input .pof you will
receive a warning asking if you want to overwrite it. Click Yes to
overwrite the file or enter a different filename. When the Quartus II
software finishes converting the file, you can use the converted .pof
to program the on-board parallel flash device.
1
The Quartus II software also generates a MAP file, which
can help you debug issues with locations in the flash device.
Altera Corporation
July 2010