Product Labeling - Hatteland HD 12T21 STD-xxx-Fxxx User Manual

Product Labeling

Introduction
This section details the locations, content details and specifications for factory mounted labels for all currently
available standard Hatteland Display Standard Industrial Display (STD) models. This information will in most cases
also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please
refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
Label Size and Types
ID Label Layout
As shown (green dot, no text)
N/A
IND100077-115
Description
Type : Serial Number Label
Name : Label B
Size : 60mm wide x 22mm high (rectangle size)
Note: Text content of label will match specifications
derived from Data Sheet.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly defined as ISO/IEC 15417:2007.)
Type : Touch Screen Label
Name : Label B
Size : 60mm wide x 22mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order. Text content of label will vary depending
on touch screen technology used.
Type : Warranty Label
Size : 30mm wide x 23mm high (oval size)
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
Type : Product Tested OK in Production Label
Size : 10mm (circle in diameter)
Note: Located on Terminal/Connector metal plate, near
Power Input/Output connectors.
12
Specification
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Tampering proof sticker with glue
on back.
Ordinary sticker with glue on
back.
Ordinary sticker with glue on
back.