Table of Contents
Advertisement
Product Labeling
Introduction
This section details the locations, content details and specifications for factory mounted labels for all currently
available standard Hatteland Display Standard Industrial Display (STD) models. This information will in most cases
also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please
refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
Label Size and Types
ID
Label Layout
IND100077-146
Description
Type
: Serial Number Label
Name
: Label B
Size
: 60mm wide x 22mm high (rectangle size)
Note: Text content of label will match specifications
derived from Data Sheet.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly defined as ISO/IEC 15417:2007.)
Type
: Touch Screen Label
Name
: Label B
Size
: 60mm wide x 22mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order.
Note: Content on label will vary based on Touch Screen type and/or Touch Screen
Controller. Label shown to the right is for illustration purposes only!
Type
: Warranty Label
Size
: 30mm wide x 23mm high (oval size)
Type
: Quality Control (QC) Label
Size
: 30mm wide x 23mm high (oval size)
10
Specification
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Tampering proof sticker with glue
on back.
Ordinary sticker with glue on
back.
Advertisement
Table of Contents
