Waldorf Q Keyboard User Manual page 83

N/E Select F1 / F2 Feed Noise / ExtLeft / ExtRight / ExtL+R
Sets the input signal sources that are fed into filter 1 and filter 2.
Please note that the N/E Balance control behaves differently compared to the other Balance controls.
N/E Balance only affects the input levels but doesn't move the signals between the filters. F1 Feed is
always routed to Filter 1 while F2 Feed is always routed to Filter 2.
The available sources are:
• Noise selects the Noise Generator as input for the respective filter.
Amplitude
• ExtLeft selects the Left input signal as input for the respective filter.
• ExtRight selects the right input signal as input for the respective filter.
• ExtL+R feeds the summed signal of the left and right input into the respective filter.
Magnitude
Time
1 10
Picture 21: Noise
83
Sound Parameters – Mixer
Frequency (Hz)
100 1000 10000
Waldorf Q User's Manual