Reverb - Waldorf Q Keyboard User Manual

Sound Parameters – Effects
Source
Selects the source of the second signal that is used for the ring modulation. The first signal is the
summed output of the current Sound or Instrument. You can find more details about the function of a
ring modulator in the sub chapter "Ring Modulator" on page 81.
Chor/Dlay
Controls the mix level of the Chorus/Delay effect.
Speed
Controls the LFO speed of the Chorus effect.
Depth
Controls the modulation depth of the Chorus effect.
Delay
Controls the initial delay that is added to the Chorus delay line.

Five FX is perfect for processing external audio signals. So start to experiment with Voice,
Speech and Drumloops.

Reverb

The Reverb effect is probably the most widely used effect in music production. It is used to add a
realistic ambience to clean and dry audio recorded in a studio. Very complicated mathematical
algorithms are needed to simulate the complexity of a natural reverb. As a result, good reverb
processors are very expensive. The Q's reverb effects don't intend to simulate the perfect natural
room, rather they are an addition to the Q´s sound synthesis to make it more 3 dimensional and
expressive.
HighPass
Determines the frequency where the lower frequency parts are divided from the effect signal. This
parameter works in the same way as the highpass filter in the Q´s sound synthesis. A natural reverb
doesn´t produce all frequencies equally so the highpass cuts the lower frequencies to produce a more
realistic reverb effect.
Lowpass
Determines the frequency where the higher frequency parts are divided from the effect signal. This
parameter works in the same way as the lowpass filter in the Q´s sound synthesis. A natural reverb
Waldorf Q User's Manual
External / Aux / Inst.1 FX...Inst. FX 4 / Main in /Sub1 in / Sub2 in
Chor/Dlay| Speed
064 | 032
0...127
0...127
Depth | Delay
064 | 064
0...127
0...127
HighPass ! Lowpass
000 | 080
0...127
0...127
104