Rear Panel - Waldorf Q Keyboard User Manual

Control Features and Connections – Rear Panel

Rear Panel

POWER
! C A U T I O N !
100...240V AC To reduce the risk of electric shock, do not remove cover. No user-
serviceable parts inside. Refer servicing to qualified service personnel.
max. 30VA
Vorsicht! Gerät nicht öffnen. Gefahr eines Stromschlages. Servicear-
beiten nur von geschultem Fachpersonal durchführen lassen!
This device complies to
the FCC rules part 15
Power supply socket 100...240V AC
Control Pedal / CV In jacks for connecting foot
controllers or analog control voltages (only Q
Keyboard)
Stereo External In jack for feeding external audio
signals into the Mixer section.
Main Out jacks. Deliver a stereo line level
output signal for connection to a mixing desk or
amplifier.
Sub Out 1 jacks. Deliver a stereo line level
output signal for connection to a mixing desk or
amplifier.
Sub Out 2 jacks. Deliver a stereo line level
output signal for connection to a mixing desk or
amplifier.
Waldorf Q User's Manual
Picture 2: Rear Panel Q Keyboard
Digital Out jack. S/PDIF type coaxial output for
connection to a digital mixing desk, DAT
recorder or hard disk recording system. Signal is
similar to the Main Out jacks.
Switch Pedal jack (stereo) for connecting one or
two footswitch controllers.
MIDI In jack. Used to receive MIDI data from an
external device.
MIDI Thru jack. Echoes MIDI data received at
the MIDI In.
MIDI Out jack. Used to transmit MIDI data to an
external device.
Card slot. Holds a card of type Q-Card 256 or
higher (located at the front of the Q Rack)
8
PEDAL CV IN / IN MAIN OUT SUB OUT 1 SUB OUT 2 D.OUT
1 2 Stereo Left/Stereo Right/Mono Left/Stereo Right/Mono Left/Stereo Right/Mono Coaxial
PEDAL MIDI
Tip:1 / Ring:2 In Thru Out