Waldorf Q Keyboard User Manual page 148

Global Parameters – Utility menu
Init Drums
The Q provides a special function for setting all parameters of a Drum Map to initial values. You can
use it to create a Drum Map from the scratch. This function is only available when a Drum Map is
selected.
☞
This is how you initialize a Drum Map:
•
•
•
The selected Drum Map is now initialized.
When you initialize a Drum Map, all action takes place inside an edit buffer. Therefore no data
will be lost until you store the program.
Random Sound
This function initializes all parameters of a Sound Program with random values.
☞
This is how you randomize a program:
•
•
•
The selected program is now randomized.
When you ranomize a program, all action takes place inside an edit buffer. Therefore no data
will be lost until you store the program.

Use Random Sound as much as possible. This is how most of the Q´s preset sounds are
programmed.
Rename Card
With the help of this function you can name the RAM Cards with up to 16 signs. This function is only
available if a RAM Card is put into the card slot of the Q.
First select the character to be modified via the first value dial. Then change its setting via the second
value dial. The card name can use up to 16 characters. To confirm your changes press Shift+Utility.
Waldorf Q User's Manual
Init Drums D01
Select the appropriated Drum Map.
Press Shift+Utility and choose the option Init Drums.
Press Shift+Utility again to activate the
Random Sound A001
Select the appropriated Sound program.
Press Shift+Utility and choose the option Random Sound.
Press Shift+Utility again to activate the function.
Rename Card
01[Empty Q RAM-Card]
[Utility]
function.
[Utility]
148