Waldorf Q Keyboard User Manual page 121

Arp Steplen
Changes the length of the note of a particular step. The overall length of the arpeggio depends on the
Length setting. If Length is set to legato, Arp Steplen doesn't have any effect at all. Also, if Length
is set to a very small value, Arp Steplen might not have an audible effect when you set it to a
negative value. You can create very nice staccato and legato effects with this parameter.
If ˜ is selected, the notes of this step are hold until the next step has to be played. Empty
•
steps force to still hold the notes of the step that was set to legato.
• Values pointing to the left (˙, ˘, ¯) shorten the length of the notes of this step.
• If a vertical line (˚) is shown, the step is held as long as set in the Length parameter.
Values pointing to the right (¸, ˝, ˛) make the notes of this step held longer.
˜ / ¯...˛
Arp Steplen
01[˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ˚˛ ˛ ˛ ˛ ]
121
Sound Parameters – Arpeggiator
Waldorf Q User's Manual