Waldorf Q Keyboard User Manual page 40

Multi Mode – Instrument settings
A Multi in the internal memory can point to a Sound that is stored on card or vice versa.
However, you should try to avoid to set up a Multi in internal memory that points to a Sound
on card because the Multi might sound strange if you haven't inserted the correct card.
Volume
Volume sets the output volume of the selected Instrument.
This Volume parameter sets the maximum output volume of the selected Instrument. If you use
MIDI Controller #7 (Channel Volume) to change the volume of the Instruments that receive on
this MIDI channel, the real output level is scaled to the volume set up in this parameter. This
means that if you set Instrument Volume to 10 and Controller #7 to 127, the maximum output
volume is 10.
Panning
Determines the panning position of the selected instrument. The setting left 64 stands for full left, right
63 for full right. In case you want to have the sound in the mid position select center.
With this function you can set the stereo outputs of the Q to mono outputs by selecting the full left or
full right position for the panning.
If stereo effects are active, e.g. delay, the effect will still sound in both outputs even if the basic
sound is set to full left or full right.
Channel
Channel sets the MIDI Channel for the selected Instrument. This MIDI channel is used to send MIDI
messages and to receive MIDI messages for this Instrument.
• global means that the selected Instrument receives and sends on the MIDI channel set up
in the Global menu. This setting is recommended for a Multi that should be used for a live
performance.
• omni means that the selected Instrument receives all MIDI channels and sends on the
MIDI channel set up in the Global menu. This setting is not recommended. Only use it for
diagnostic purposes when you need to know if the Q receives any MIDI messages at all.
• 1...16 means that the selected Instrument receives and sends on this MIDI channel. This
setting is recommended for a Multi that should be used for multi track playback with a
software sequencer.
Waldorf Q User's Manual
Volume ! Panning 1
127 ! center
000...127
left 64...center...right 63
Channel |Output
01 |Main Out
global, omni, 1...16
40
1