Waldorf Q Keyboard User Manual page 18

Setup and Connection – Connections
PEDAL / CV IN
1 2 Stereo
Control Pedals
Tip / Ground:
47kΩ Potentiometer
Ring: +5V
External In
from mixing desk or
audio source
Tip: Left Signal
Ring: Right Signal
To connect the devices:
1. Turn all units off.
2. Connect the Q's main audio outputs Main Out
connect the auxilliary audio outputs Sub Out 1
3. Connect the power supply cable that came with the Q with the Power Supply
4. Plug the other side of the power supply cable into a suitable AC power outlet.
5. The Q should power up itself. If not, switch on the Q with the Power button
Waldorf Q User's Manual
IN MAIN OUT SUB OUT 1
Left/Stereo Right/Mono Left/Stereo Right/Mono
Main Output
to mixing desk,
headphone or
amplifier
Left/Stereo:
Tip: Left Signal
Ring: Right Signal
Sub Output 1
to mixing desk or
amplifier
Left/Stereo:
Tip: Left Signal
Ring: Right Signal
SUB OUT 2 D.OUT PEDAL
Left/Stereo Right/Mono Coaxial Tip:1 / Ring:2
Sub Output 2
Switch Pedals
to mixing desk or
Switch 1: Tip /
amplifier
Ground
Left/Stereo:
Switch 2: Ring /
Tip: Left Signal
Ground
Ring: Right Signal
Digital Output
S/PDIF Format
Connections
to your mixing console. Optionally
and Sub Out 2
18
MIDI
In Thru Out
MIDI Thru
to MIDI In of further
tone generators
MIDI In
MIDI Out
from MIDI Out of a
to MIDI In of a
Computer or other
Computer or tone
MIDI Controller
generator
Out
too.
.
In
jack.