Waldorf Q Keyboard User Manual page 135

Key
Defines the lowest key for the selected Drum Map entry. A Drum Map entry can span over more than
one note. I.e., when you set entry #01 to C1 and entry #02 to E1, entry #01 can be played from C1 to
D#1.
Be careful with this parameter. As soon as you change it to another note, you have to press this
note to call up the entry again. This sounds obvious but it might be a trap.
Transpose
Controls the transpose offset of the selected Drum Map entry. In the Drum Map, Sound programs still
keep their various Keytrack settings, so melodic sounds still play the pitch of the notes they are
mapped to. With Transpose, you can change the Keytrack offset to the tuning you like.
Please note that this parameter shifts the incoming note. When you've set the oscillators of the
selected Sound to not respond to keytrack (O1...O3 Keytrack 0%), this parameter also has no
effect on the pitch of the oscillators.
Volume
Sets the maximum output volume of the selected Drum Map entry.
#01 Key |Transpose
C1 | +00
C-2...G8
-60...+60
0...127
#01 Volume
127
135
Drum Map – Drum Map Sound Menu
Waldorf Q User's Manual