Editing Sounds In Layers; Deactivating Sound Layers; Editing Parameters; Edit Buffers - Waldorf Q Keyboard User Manual

Editing Sounds in Layers

You can edit individual Sounds in Layers. This helps you to fine-tune a Sound to match it to the sound
character of the Layer.
☞
To edit one Sound of a Layer:
1. Press the Instrument button Inst. 1...Inst. 4
The LED above the Instrument button lights up fully.
2. Now you can edit the Sound with the panel controls and its menus.

Deactivating Sound Layers

☞
To deactivate a Sound Layer:
• Press all Instrument buttons Inst. 1...Inst. 4
or
• Press an Instrument button Inst. 1...Inst. 4

Editing Parameters

In order to change or edit a program in the Q, you must access the appropriate parameters.
Depending on the type of parameters, there are different ways to achieve this:
• The controls on the Q's front panel offer direct access to the most important sound
parameters. The panel is divided into several sections, each containing knobs and buttons
associated with that section. By adjusting the controls on the panel, you have instant
access to the sound. These parameters are called panel parameters.
• Most sections offer an Edit button. Pressing this button calls up the display menu for that
section. The display menu contains additional parameters that are not accessible directly
via the control elements on the panel. These parameters are called display menu
parameters.

Edit Buffers

Whenever you edit a program on the Q, the program is internally copied to an edit buffer. When you
use the Store function to save the edits, the program is copied back from the edit buffer to the
internal memory. The display shows an e behind the program number for every program that is
actually in an edit buffer:
The Q has a number of different edit buffers, each holding a program of the specific type when you
edit them:
• 1 Multi edit buffer:
This buffer holds the currently selected Multi in Multi mode.
• 1 Drum Map edit buffer:
This buffer holds the currently edited Drum Map in single or multi mode.
• 16 Sound edit buffers:
Each buffer holds an edited Sound.
Inst:1 Sound:A001e
Zeitlos
31
Basic Operation – Editing Parameters
that holds the Sound you want to replace.
that make up the Sound Layer.
that isn't part of the Sound Layer.
T
Waldorf Q User's Manual