Flexible Feature Button Programming[Feature]#E - Comdial DX-80 User Manual

2. Use the [back] and [next] buttons to move through the display
categories.
3. Use the HOLD button to return to a previous menu level.
4. Press the ON/OFF button twice to exit Feature/Directory Number
Lookup.

Flexible Feature Button Programming[FEATURE]#e

Digital Speakerphones have thirty dual-colored Flexible (Programmable)
Feature Buttons. You can store any system feature code on any available
Feature Button for one-button operation. Certain programmed feature
buttons will light when activated (DND, Call Forward, DSS/BLF, etc.), while
others such as Call Pick-Up, Background Music, Last Number Redial, do
not.
Features are separated into two distinct categories for programming onto
Flexible Buttons: Directory Numbers or Feature Codes.
Operation
1. While the phone is idle, press [FEATURE]#e. The display
indicates that you are in Feature Key programming mode by prompting
you to press a key:
2. Press the Flexible Feature Button that you want to program. The
current programming displays:
3. Press [chg].
4. To program the button, you must know the code type. Use
Feature/Directory Number Lookup to locate the feature and code you
want to program.
4.1. To program a directory number, press [dir].
4.1.1. Input the appropriate directory number and then press [save].
DX-80 Digital Executive Telephone User Guide
PRESS FTR KEY
F98____
SELECT FUNCTION
dir feat
DIR NUMBER :_
bksp save chg
If you make a mistake, use [bksp] and [chg] to re-enter the
number.
show chg
Page 41