Automatic Hold [Feature]Or - Comdial DX-80 User Manual

Operation - Activate
1. Press [FEATURE]y#. The current time displays (NULL=none).
2. Press [chg] to enter a new alarm alert time.
3. Enter new time in "HHMM" 24-hour format (HH = hr, MM = min.)
4. Press [save]
5. Select [one], for a one-time alarm or [always ] for repeated.
Operation - Notification
1. Alarm sounds and the display shows:
2. Press [ack] button to stop the alarm or wait for it to stop. (The display
will remain until [ack] is pressed.
Operation - Deactivate
1. Press [FEATURE]y#. The current time displays (NULL=none).
2. Press [del].
Automatic Hold
If you are on a call and you press an outside line button, Automatic Hold
will automatically place the current call on hold. For instance, if you are
currently on a call on line 1 and you press line 2, the call on line 1 will be
placed on Exclusive Hold automatically. Similarly, if you are currently on an
intercom call with another DX-80 extension and you press an outside line
button, the intercom call will be placed on Exclusive hold. You do not need
to press Hold unless you want to place a call on System Hold.
Operation – Setup
1. Press [FEATURE]or.
2. You hear confirmation tone and the display shows:
3. The extension returns to an idle state.
Operation – Enable Auto Hold
1. While connected to an intercom or outside line call (you must have
dialed a number or answered a call), press another outside line
button.
2. The current connection is placed on hold and the next connection is
established.
DX-80 Digital Executive Telephone User Guide
ALARM REACHED
ack
AUTO HOLD ALLOW
[FEATURE]or
Page 29