Hold - Exclusive [Feature]Hold; Hold Reminder; Holding Call Answer - Select Hold - Comdial DX-80 User Manual

line. The same system hold line will flash the red lamp at all other
extensions.
Operation
1. While on a line, the green lamp for that line is I-Use flashing (double
wink rate).
2. Press the HOLD button. The green lamp now flashes at a slow rate
and the call is placed on System Hold.
Hold – Exclusive
When using the feature button and the hold button together, you may place
an outside call on private/exclusive hold. The held line will appear in use at
other extensions.
Operation
While connected on an outside line, press the [FEATURE] button and then
press the HOLD button.

Hold Reminder

The system provides a programmable timer to remind you that a call has
been left on System or Exclusive Hold. When Hold Reminder is enabled,
you will hear one ring tone repeated each time the selected time expires.
Holding Call Answer – Select
Holding Call Answer allows you to place call on hold and retrieve calls from
hold by simply pressing the HOLD button. When multiple calls are holding
at an extension, Holding Call Answer will access the outside line that has
been holding the longest while placing the current call on hold.
Holding Call Answer works for all outside lines regardless of the extension
outside line button programming. It is possible to handle calls that do not
appear (no button) at an extension via Holding Call Answer.
Operation
1. When one or multiple calls are holding at your extension, press the
HOLD button.
2. The oldest holding call is connected.
3. Press the HOLD button again to place this call on hold.
4. Press the HOLD button again to answer the next oldest holding call.
5. Repeat as required for any calls on hold at your extension.
DX-80 Digital Executive Telephone User Guide
[FEATURE]HOLD
HOLD
Page 19