ColorSource User Manual
Installing pipe mount brackets on the Power Supply
To install pipe mount brackets on your ColorSource Power Supply,
follow these steps.
1. Unplug the power cord from the Power Supply.
2. Place the Power Supply upside down on a flat surface.
3. Use a Phillips head screwdriver to remove the rubber feet from
each of the four corners. Store the feet somewhere safe.
4. Position the brackets as shown below.
5. Attach the brackets using the screws supplied.
6. Mount the Power Supply on the desired pipe using the bolts
provided as shown below.
7. Wrap the safety cable around the pipe and clip it to itself.
13